No products in the cart.
Second Stage Regulators
REGO 2nd Stage Regulator 250MJ/h – 1/2″ NPT x 1/2″ NPT
REGULATOR REGO 2ND STAGE 250MJ 1/2″ IN & 1/2″ OUT
$178.70 ex. GST
Compare
REGO 2nd Stage Regulator 250Mj/h – 1/2″ NPT inlet x 1/2″ NPT outlet
Application
Designed to reduce first stage pressure of 5 to 20 PSIG down to burner pressure, normally 11” w.c. Ideal for medium commercial installations, multiple cylinder installations and normal domestic loads.
Features
• Large vent helps prevent blockage and has 3/8″ F.NPT for vent piping.
• With 15 PSIG inlet pressure, regulator is designed to not pass more than 2 PSIG with the seat disc removed.
• Incorporates integral relief valves.
• Replaceable valve orifice and valve seat disc.
• Straight line valve closure reduces wear on seat disc.
• Unique bonnet vent profile minimizes vent freeze over when properly installed.
• Large molded diaphragm is extra sensitive to pressure changes.
• Built in pressure tap has plugged 1⁄8″ F.NPT outlet.
| Weight | 1.38 kg |
|---|---|
| Dimensions | 13 × 22 × 13 cm |
| Maximum Flow Rate | 250 MJ/h |
| Outlet Thread | 1/2" NPT |
| Inlet Thread | 1/2" NPT |
Brand
RegO Products
Gameco stocks a complete range of RegO LP Gas and Anhydrous Ammonia Equipment. Our four fully stocked warehouses enable quick supply to all areas of Australia and New Zealand, and with direct factory support, there is nobody better placed to assist with you with all your RegO needs.Click Here for the full RegO Catalogue. Please don’t hesitate to contact us for assistance.Find here the following RegO product information:A) Rego Regulators and AccessoriesB) Rego Cylinder and Service ValvesC) Rego Multivalve® AssembliesD) Rego Pressure Relief Valves and Relief Valve ManifoldsE) Rego Globe and Angle ValvesF) Rego Excess Flow, Check, Filler and Vapor Equalizing ValvesG) Rego Internal Valves and AccessoriesH) Rego Adapters, Connectors and FittingsJ) Rego Miscellaneous Equipment (Including Rotogages and ESVs)Please don’t hesitate to contact us for assistance.
