Rego Dual Stage Regulator with Manual Changeover Valve and Flexible Pigtails


REGO Twin stage regulator kit manual changeover 450MJ 1/2″ outlet and Flexible pigtails

$365.80

Compare

REGO Twin Stage Regulator kit 450MJ/h 1/2″ outlet, w/ manual changeover valve and 2x flexible pigtail.

Description:

Kit comes with:

  • REGO twin stage regulator, guaranteed 450MJ/h @ 2.75kPa  [LV404B4]
  • Manual changeover (MCO) 2 bottle adapter [7010-2]
  • 600mm flexible stainless steel braided pigtail x2 [GAMFP-600POL]
  • Mounting bracket [2403-UB]
  • Regulator to bracket bolts x2
Application:

This regulator is great for medium sized house installations, (<450MJ/h) it comes with all the bits to mount the regulator and connect to the cylinders (bracket mounting screws 3403SCW sold separately). Comes with flexible stainless steel braided pigtails (600mm) for connections to 9/45kg cylinders. It has a 1/2″ NPT female outlet, adapters to pipework sold separately.

Special Features:

This regulator has been tested for Australian conditions and has been rated to deliver a guaranteed 450MJ/h at 2.75kpa (11″ WC).

  • Includes a manual changeover valve for operating two cylinders or banks, one at a time.
  • Large vent helps prevent blockage.
  • 1st stage vent outlet is tapped ⅛” female NPT for vent piping.
  • Second stage vent outlet is tapped to ⅜”female NPT for vent piping.
  • With 15 PSIG inlet pressure, the regulator is designed to not pass more than 2 PSIG downstream with the seat disc removed (complies with over pressure protection requirements).
  • Incorporates an integral relief valve on second stage.
  • Unique bonnet vent profile minimises freezing over of vents when properly installed.
  • Compact design saves space allowing for easy installation – especially under container hoods with collars.
  • Pre-tapped & plugged test point outlets 1/8” female NPT on both 1st stage and second stage outlet.
  • Plugs can be removed with a 3/16” hex (Allen) wrench.
  • Select brown finish.
Notes:

Images are representative of the type of regulator and are not necessarily the actual kit described.

Image is of a similar regulator with MCO valve attached, additional image of pigtails supplied with this kit, supplied bracket is also represented in additional image.

SKU: LV404B4M-FP Category:
Weight2.5 kg
Dimensions23 × 13 × 13 cm
Maximum Flow Rate

450 MJ/h

Outlet Thread

1/2" NPT

Inlet Type

Manual Changeover

Brand

RegO Products

Gameco stocks a complete range of RegO LP Gas and Anhydrous Ammonia Equipment. Our four fully stocked warehouses enable quick supply to all areas of Australia and New Zealand, and with direct factory support, there is nobody better placed to assist with you with all your RegO needs.Click Here for the full RegO Catalogue. Please don’t hesitate to contact us for assistance.Find here the following RegO product information:A) Rego Regulators and AccessoriesB) Rego Cylinder and Service ValvesC) Rego Multivalve® AssembliesD) Rego Pressure Relief Valves and Relief Valve ManifoldsE) Rego Globe and Angle ValvesF) Rego Excess Flow, Check, Filler and Vapor Equalizing ValvesG) Rego Internal Valves and AccessoriesH) Rego Adapters, Connectors and FittingsJ) Rego Miscellaneous Equipment (Including Rotogages and ESVs)Please don’t hesitate to contact us for assistance.

Product Enquiry