REGO 2nd Stage Regulator 450MJ/h 5kPa set pressure 1/2″ in & out

REGO regulator 2nd stage 15-35″ WC (5kPa) 450MJ



REGO™ Second Stage Regulator, 450MJ/h at 5kPa (15-35″ WC), 70kPa in, 1/2″ NPT inlet & outlet.

Designed for Boilers and other similar Type B appliances.


The REGO™ LV4403H series 2nd stage regulators are designed to reduce 70kPa (10PSI) first stage regulator outlet pressure, to 5kPa(15-35″ WC).

This regulator is guaranteed to pass 450MJ/h at 5kPa from a supply of 70kPa.

     Comes with:

  • REGO 2nd stage regulator, guaranteed 450MJ/h @ 5kPa  [LV4403H420]
  • Bracket mounting bolts x2

     Sold seperately:

  • Mounting bracket [2403-UB]
  • Bracket mounting screws [2403SCW]
  • 1st stage regulators [LV3403TR, LV4403TR]
  • Thread adaptors NPT male to BSP female [BTA-1/2]

Ideal for commercial and industrial applications, this regulator is designed for appliances requiring greater than the standard 2.75kPa working pressure.

Set at 5kPa this regulator is designed for use with some boilers and other type B appliances, requiring less than 450MJ/h.

Special Features:

This regulator has been tested for Australian conditions and has been rated to deliver a guaranteed 450MJ/h at 5kpa (20″ WC).

  • This regulator has 1/2″female NPT inlet & outlet thread size.
  • Large diaphragm is extra sensitive to pressure changes
  • Straight line valve closure saves wear on seat disc and orifice.
  • Extra long lever arm for uniform delivery pressure.
  • With up to 15 PSIG inlet pressure, the regulator is designed to not pass more than 2 PSIG downstream with the seat disc removed (for compliance with over pressure protection requirements).
  • The large bonnet vent profile minimises freezing over of vents when properly installed.


  • It incorporates an integral relief valve
  • The large vent helps prevent blockage.
  • Vent outlet is tapped to ⅜”female NPT for vent piping.


  • Pre-tapped & plugged test point outlet 1/8” female NPT (for a gauge or manometer test point).
  • Plug can be removed with a 3/16” hex (Allen) wrench.


  • Select brown finish.

Images are representative of the type of regulator described and is not necessarily the actual part.


SKU: LV4403H420 Category:
Weight1.4 kg
Dimensions22 × 13 × 13 cm
Maximum Flow Rate

450 MJ/h

Outlet Thread

1/2" NPT

Inlet Thread

1/2" NPT


RegO Products

Gameco stocks a complete range of RegO LP Gas and Anhydrous Ammonia Equipment. Our four fully stocked warehouses enable quick supply to all areas of Australia and New Zealand, and with direct factory support, there is nobody better placed to assist with you with all your RegO needs.Click Here for the full RegO Catalogue. Please don’t hesitate to contact us for assistance.Find here the following RegO product information:A) Rego Regulators and AccessoriesB) Rego Cylinder and Service ValvesC) Rego Multivalve® AssembliesD) Rego Pressure Relief Valves and Relief Valve ManifoldsE) Rego Globe and Angle ValvesF) Rego Excess Flow, Check, Filler and Vapor Equalizing ValvesG) Rego Internal Valves and AccessoriesH) Rego Adapters, Connectors and FittingsJ) Rego Miscellaneous Equipment (Including Rotogages and ESVs)Please don’t hesitate to contact us for assistance.

Product Enquiry